Do you have a Nexus phone with the touch screen broken and does not register any touch? Online Nexus mobile phone service center in Whitefiled show you how to use it with this problem.
The epidemic of broken screens is more widespread than that of salmonella in summer: few are those who have not shattered the glass at least once. And many are still using the mobile despite this , that the only problem is usually the fact of viewing the screen through the cracks. Hopefully, because it could be the case that, in addition to the surface panel, the digitizer or touch panel was also broken do it more often
The screen of an electronic device is composed of several elements:
- The exterior of hardened glass (usually Corning Gorilla Glass).
- An intermediate layer where the digitizing panel is housed: the element in charge of detecting screen touches to transform them into position events that give information to the system of where the fingers are placed .
- The actual screen or display that is responsible for projecting the image.
layers are firmly attached, so they are very difficult to separate. Sometimes the three components are broken and sometimes only one (or two); and for each case there are concrete solutions, although all are solved by changing the glass pack + digitizer + display: it is the replacement that is usually sold individually .
As a general rule, a smartphone would be unusable. But, fortunately, Android includes ways to manage the system beyond mere finger navigation . Not all can alleviate the problem of the loss of the touch panel because it will depend on the hardware and if we have been proactive, but, as a rule, we can recover what is saved and even use the smartphone for other uses beyond the mobile phone every day (camera security, multimedia center ...).
The easiest way to replace the fingers is to use the phone with a USB mouse and an "On The Go" adapter (a plug that transforms the micro USB of the mobile into a normal size USB female connector). Once we connect the mouse to the smartphone it will detect it as an input device showing a pointer on the screen. Thanks to him we can move like a computer with the advantage that we will not have to install any driver or anything like it: plug and go.
It does not need much explanation: if the device does not work because it does not detect the fingers, and is compatible with OTG (it is normal, almost all current phones and tablets come with this function), we can change the fingers by the mouse cursor . Even to type the pin or draw the unlock code.
If it is not compatible with OTG the thing is complicated enough: the mobile can only be used if you have been proactive with one of the following methods:
- You previously registered your Android with a wireless mouse via Bluetooth . If you still keep the Bluetooth connected, simply turn on the mouse again.
- You used some system of remote connection with the computer . AirDroid is a good example : if it is still activated on your Android you can access it through a web browser.
- If you had activated USB debugging you can use the device with ADB . It is somewhat complicated, but using ADB commands you can launch any operation from the computer, even the simulation of gestures. Or better: you can use programs like Viewer to move the Android screen to your computer and manage it from here. Of course: you will need to have previously accepted the use of that computer through the RSA key .
What happens when the digitizer panel of the mobile phone breaks?
Whether it breaks with the glass or enters into the mess also the display for display replacement visit Nokia service center in Whitefield: the smartphone stops detecting the pulsations on the screen . Or what is the same: a touch phone loses its meaning automatically. As we will not even unlock the screen (unless the phone has fingerprint reader and is configured to start the screen with digital reading only), any use we want to make the mobile will be disabled .
Of power it is possible: technically, and although the spare parts of screen come with all the already joined layers to thus change them in block (or with the crystal plus the digitizer), the component that makes a mobile can be repaired can be repaired. Although that yes: take off the layers to change the digitizer is a task only suitable for highly specialized technicians in Online nexus phone service center in Whitefield . If you try, you have many possibilities to crack the display or the whole set.
In the event that the mobile phone does not detect the fingers due to a fault in the touch panel we must change the screen in block or go to a specialized center to change it (they will never change only the digitizer). On average, a full screen is around 7.695,41 ; although it can exceed 150 depending on the category of the model or the availability of the pieces (if it is a very popular smartphone it is easier to find cheap spare parts).
My recommendation is that, as far as possible, you repair the screen of your phone, whether or not the touch panel is your only problem. Changing the screen is usually easier than it seems: just follow a specific Repairtech Service center for the model, always use the right tools (very important) and buy the spare part from a reputable dealer. It is cheaper than you think, you will learn how your smartphone works and you will avoid acquiring another mobile just because the old one does not detect your fingers. Meanwhile you already know how to continue using it even if you can not use its tactile resources.
