Repairtech Special offer.
We will get back to you within an hour.
The most common trouble that cell phone owners face is broken glass.
Phones often fall, glass, like the most fragile part, beats in the first place. It would seem - there is no problem to go to replace the glass on the phone, but in practice everything is not so simple.
Previously, the glass on the phone changed separately, and the glasses cost a penny. Even now they are inexpensive, but with the advent of the era of touch phones, the procedure for replacing glass has become much more complicated. What is the price of changing the glass on the phone now, taking into account the work?
If you have a touch phone and the glass is broken, you need a replacement, then you need to visit
Phones often fall, glass, like the most fragile part, beats in the first place. It would seem - there is no problem to go to replace the glass on the phone, but in practice everything is not so simple.
Previously, the glass on the phone changed separately, and the glasses cost a penny. Even now they are inexpensive, but with the advent of the era of touch phones, the procedure for replacing glass has become much more complicated. What is the price of changing the glass on the phone now, taking into account the work?
If you have a touch phone and the glass is broken, you need a replacement, then you need to visit
- Oneplus mobile service center in Btm layout
- oneplus mobile service center in Marathahalli
- Oneplus mobile service center in Silkboard
Nevertheless, glass can still be changed. The procedure for replacing the glass on top models is as follows: the display module is heated with a special hair dryer or a special heating pad, the glue with which the glass is glued to the sensor is softened, then with a knife, a thin spatula, plastic playing card, a special molybdenum wire and the like, the glass is disconnected from the screen. Then the remnants of the glue are removed with a special solvent, scraper, napkins, soft cloth, etc. A new glass is placed on either a double-sided adhesive tape or special UV glue (similar to the factory one).
In the description it looks pretty simple, but in practice everything is far from the case.
First, to achieve uniform heating of the display module surface is extremely difficult, there is a danger of overheating the display and sensor, after which either the image disappears or the sensor will not work correctly. This can occur both immediately and after a while.
Secondly, remove the glass without problems is obtained only if there are one or two large cracks on the glass, in the case when a glass of cracks is on the glass, the glass will crumble, and the fragments easily damage the sensor, as a result you will still have to change display module entirely. Also, from the impact in the display, there may already be microcracks, which do not manifest themselves before the procedure, but with heating and / or pressure on the glass, I can cause the LCD display to malfunction.
Thirdly, cleaning the sensor from the adhesive is also not useful for the phone, the glue is removed with a scraper, cloth, etc., the sensor is seriously affected, which can also lead to its failure.
And finally, in the majority of cases, the masters put a new glass on a double-sided adhesive tape glued along the perimeter of the screen, it is impossible to ensure a tight fitting of the new glass, dust will accumulate under it, and the tape itself may go away.
It is not always possible to put a new glass on glue, not only a special glue, preferably German, but also an ultraviolet lamp (the principle of solidifying the glue in the dental office when placing a photo polymer seal) is required, and preferably a special equipment for the display and glass to provide 100 % exact hit of the glass in its place.
Work on the replacement of glass takes up to three hours, it is extremely laborious and requires a very high skill for the master. At the same time, if something does not work out, then the master for this also answers, explaining something to most clients is impossible. Guarantees for a successful outcome of the operation can not be given any.
That is why in most professional workshops you will be told that the glasses do not change, and they will offer to replace the display module entirely. Of course, you can find a master or a service where they will take it, but be sure that the windows there change in an amateur way, the probability of success is 50/50, the probability of further working capacity and the preservation of the appearance of the phone is even lower.
1. Professional replacement of glasses Samsung Galaxy at a price of 3000 rubles (including the cost of glass). The phone is ready for 1-2 days.
Note: Experience shows that in 99% of cases, the glass on the phone can be changed, while maintaining the appearance of the phone from 85 to 100%. Statistics of the further working capacity of the display and the sensor have not been accumulated yet (secondary appeals of people, to whom they changed, have not yet been).
2. Sami glass for Samsung, Nokia, Iphone, HTC - you can buy our glass and replace it yourself, or contact those who offer to change the glass cheaper than ours.
3. We offer replacement of the display or touchscreen along with the glass: in this case you are guaranteed to get the lowest price of replacement of the screen in the Bangalore city, using original spare parts and with full preservation of the working capacity and appearance of the phone.
In any case, you decide! We hope that the above information will help to make the right decision.
So, in case you need a replacement glass Samsung, Nokia, Iphone, Sony, HTC, LG, Fly and other phone models, we are waiting for you in our Repairtech mobile service!
Special offer.
Order a glass replacement right now and get a 10% discount.
We will get back to you within an hour.
