Vivo v9 touch issue solution

Vivo v9 Touch issue Fallow vivoservice center @Repairtech guidance

If your Vivo v9 dispaly damage and stuck, flickers, pops, flashes, has dead pixels, or if nothing is displayed, follow these quick fixes and troubleshooting steps.

After following each recommended solution, check if the problem is resolved.

1. Make sure the Vivo v9 screen is not cracked, chipped or damaged.
2. If you are using a protective case or film, remove it.
3. If you wear gloves, remove them.
4. If you have pasted stickers on the screen or the sensors, remove them.
5. Make sure the screen is clean.

If none of the quick checks above have resolved the problem, follow the troubleshooting steps below.

Restart device

To restart your vivo v9 , follow these steps:

• Press the Power button on the device. On the screen, tap Restart  .
• If the "Restart" option is not displayed, press the Power button on your device for about 30 seconds until it restarts.

After rebooting, if the vivo v9 touch screen still does not work, you can restore the device to its factory settings(see below).

Determine if an application is causing the problem

The problem may be caused by an application that you have downloaded. To find out if this is the case, you can restart your device in safe mode.

1. Press and hold the Power button on your device.
2. On the screen, touch and hold Shut Down  . Press OK .
3. Once the device is in safe mode, tap the screen.
   • If your screen is running in safe mode , it probably means that an application you downloaded is the source of the problem.
     1. Restart your device to exit safe mode.
     2. To identify the application in question, uninstall one by one the applications you have recently downloaded.
     3. After removing the problematic application, you can reinstall the other deleted applications.
   • If your screen does not work in safe mode , continue to the next section.

Test the part of the screen that is causing the problem

If the problem only occurs a few times, or if it only appears to be a specific area of ​​the screen, you can use the quick setup bar and notifications to check.

1. Tap the upper-left corner of the screen.
2. Gently slide your finger toward the lower right corner of the screen, without lifting it. Try moving your finger slowly enough so that you can count to 10 before reaching the opposite corner of the screen.
   • You can drag the quick setup bar and notifications to the bottom of the screen.
     This means that the problem does not come from a specific area of ​​the screen. Learn how to reset your device to factory settings (below).
   • The quick setup bar and notifications go up before you can reach the bottom of the screen with your finger
     Repeat the process. If they go back up again, note if the problem occurs on the same area of ​​the screen. Then contact the manufacturer of your device .

Disable options for developers

It is possible that enabling options for developers affects the performance of your Vivo v9 Lcd screen.

1. Open the Settings app on your device.
2. Tap System Options for Developers . This setting is only displayed if you have enabled options for developers.
3. Disable options for developers .

Note : The settings may vary by device. To find out about the features of your device, contact its manufacturer .

If your Vivo v9 Dispaly problem still does not work properly after you've tried all of the common solutions above, you can try following these advanced troubleshooting procedures.

Restore factory configuration of the device

By restoring the factory configuration of your vivo v9 mobile , you can remove any processes that may be causing the problem.

IMPORTANT: Restoring the factory configuration deletes all data from the device. The data stored in your Google Account will be restored, but all applications and their associated data will be uninstalled. We recommend that you back up the data on your device before restoring the factory configuration.

If the problem is caused by an application that you have downloaded, it may be repeated if you reinstall it.

• Learn how to back up and restore data.
• Learn how to restore the factory configuration .

Contact the manufacturer of your device

If problems persist, consult the manufacturer's or your operator's support site .

vivo mobile service center in whitefield

ADDRESS:
Repairtech - vivo mobile and Tablets service center, Shop no 26, 2nd floor, Arya Hub Mall,
ITPB Main Rd, Prasanth Extension, Whitefield, Bengaluru, Karnataka 560066