Could not charge your Mi note 5 screen replacement ? Your smartphone is well detected by your computer and lights on mains but the battery is totally HS? It does not load anything, preventing you from using your Honor 8 at your spare time. Or the percentages of charge melt visibly during the day, forcing you to charge your mobile several times a day. In short, you're tired of this low autonomy and you decided to take action!
You're right and you're in the right place for this because repairtech experts have made this illustrated and commented repair guide that tells you how to replace this faulty
Honor 8 battery yourself through detailed steps. You will see that repairing his smartphone is within the reach of all with good advice and a little patience (for this, we can not help you, but we trust you!). Go ahead, throw yourself in the water and save up to three times the price of the intervention of a professional Mi service center near me.
Symptoms:
- Battery that swells
- Low autonomy
- Honor 8 which goes out
- Overheating load
- Charge problem
- step 1
Before moving the battery of your Honor 8, it is necessary for obvious safety reasons to turn it off. .in some cases it may leads battery connection failure which may costs you Mi note 5 screen cost.
To do this, press the ignition button for a few seconds and then confirm the shutdown by "Switch off".
Step 2
Take the extraction tool from the SIM / SD card drawer and insert it into the eject hole.
Enter the drawer and remove it.
Step 3
The SIM / SD drawer of your Honor 8 is now removed.
step 4
To remove the back cover of the phone, it is necessary to heat it completely for 1 to 2 minutes using a hair dryer.
The facade is particularly well glued, we advise you to re-heat it from time to time during the entire disassembly process so as not to break it.
step 5
Place a suction cup on the top of the glass.
Once the facade is warm enough, while gently pulling on the suction cup , insert an iSesamo spatula into the lower left interstice of the phone.
Step 6
Peel off the bottom part by sliding the spatula over the entire lower part.
step 7
Then peel off the upper part and then the left part.
step 8
helping you to cup, gently pull the window and open it in the manner of a book.
Do not separate the glass of the phone! The latter is always linked to the latter by the fingerprint sensor that is stuck on it!
Step 9
Unscrew the Phillips screw circled in red to hold the metal cap of the fingerprint sensor connector.
Insert then remove the cover with pliers.
Step 10
Then help the nylon trowel to detach the fingerprint sensor's water table.
Step 11
The rear window of your mi note 5 is now dismantled.
Step 12
Remove the Phillips 16 screws circled in red.
These screws hold the internal telephone box.
step 13
Start the iSesame trowel and unhook the upper left side of the chassis.
Then continue through the top of the phone.
step 14
Slide the trowel through the left side to the bottom of the phone.
step 15
then unhook the bottom of the phone.
step 15
then unhook the bottom of the phone.
step 16
Finally, end up in the right side of the frame and release.
Insert the frame and proceed with its withdrawal.
step 17
The internal frame of the 8th Honor is disassembled.
step 18
Before proceeding, it is for safety reasons to disconnect the battery.
Disconnect the battery web using the nylon spatula.in some cases it may leads battery overheating issues which may costs you Mi note 5 glass replacement.
step 19
Heat the side opposite to the battery screen side for 15 to 20 seconds.
This operation is intended to soften the battery glue.
Please do not heat up too long it may damage the LCD screen..in some cases it may leads LCD screen damage which may costs you Mi LCD replacement.
Drag large flat trowel under the battery on the left side then made progressively and gently the takeoff lever.
The amount of glue in the battery is large and the adhesion force is powerful! This may take some time.
Do not bend or puncture the battery during operation
Once detached, grasp the battery and proceed with its withdrawal.
step 21
The Huawei Honor 8 battery is removed.
In low-power conditions, replace the battery with a new one.
